Install different size zipper pulls with ease!
This metal clamp on zipper aid helps you install and attach various different zipper sliders without having to trim your zipper tape. Fully adjustable and customisable to suit a variety of zip pull sizes. Includes x 1 small screw driver. 
Setting up:

•  Attach device to work top or desk using the clamp. 
• Remove the two screws on the side of the clamp, and attach the silver sliding arm. Adjust height by tightening the screws. 
• Silver arm can be positioned facing to or away from you depending on preference. 
• Loosen the screws on the top flat sliding plate and adjust further forwards or backwards depending on the size of your zipper pull. 
• Seperate the prongs to loosen and create the correct size slot for your zipper pull. These prongs will hold your zipper pull in place by the "loop" of your pull with the bottom of the pull touching the flat edge of the sliding plate. 
• Squeeze prongs together to clamp your pull in place. 
• Take both sides of your zipper tape, with teeth facing upwards, insert both sides equally and at a V shaped angle. Gently pull inwards until your zipper pull attaches and your zip teeth connect together.