Attaches threaded pearls or beads on the edge of fabric. Can be used for string of 3 to 4 mm pearls and beads.

HOW TO USE:

1. Retract the knife on your machine.
2. Set the machine setting: 3 thread overlock, stitch length to pearl size, stitch width to 3 mm from 5 mm, and adjust the tension.
3. Fold the fabric.
4. Align the edge of the fabric to the guide on the front of the foot.
5. Adjust the guide so that the needle moves down at the position of 1 to 1.5 mm from the folded edge.
6. Place the strings of pearls/beads onto the tunnel and then sew.

This accessory will fit the following machines:

• 1034D

Can't see your machine on the list? Not a problem!! Click HERE to contact us, or give us a call on 01254 693555.