This presser foot is used for sewing the straight stitch with the centre needle position.

This presser foot is used for folding bias tape in four while edging fabric at a width of about 0.2” (5mm).

The Pintuck Foot (Narrow) is used for sewing narrow pintucks on blouses and handkerchiefs using two needles.

The Pintuck Foot (Wide) is used for sewing wide pintucks on blouses and handkerchiefs using two needles.

This presser foot is used for inserting a concealed zipper.

This presser foot is used for sewing blind hem stitches, which are sewn along the hems of pants and skirts to be invisible from the right side of the fabric.

This presser foot is used for closely sewing along the edges of a zipper.

This presser foot is used for closely sewing along the edges of a zipper.

The Adjustable Zipper Foot is used for closely sewing along the edges of a zipper or piping cord.

This presser foot is used for stretch fabrics (such as knits), hard-to-feed materials (such as vinyl-coated fabric) and unevenly fed material (such as quilting or fabric with a nap).

This presser foot is used for stretch fabrics (such as knits), hard-to-feed materials (such as vinyl-coated fabric) and unevenly fed material (such as quilting or fabric with a nap).

This spool pin is used when another thread spool is needed for twin needle sewing or bobbin winding.

The mounting base allows you to attach the LED pointer, boroscope camera, and magnifying lens attachment to the sewing machine.

This magnifier allows the needle area to be enlarged by approximately 1.4 times, making it easier to see.

The marks at a 0.07” (2mm) spacing on this presser foot can be used as guides for stitching.

The Compact Guide Edge Sewing Foot is used for patchwork quilting, edge stitching during dressmaking (in the case of sewing waistbands and neckbands), outline quilting, and single lap stitching.

This presser foot is used for free-motion quilting.

Increase efficiency by using your knees to lift and lower the presser foot without using your hands.

This stopper can be used for disabling the foot switch of the foot controller.

This presser foot is used for sewing on strands of pearls or beads.

This presser foot is used for stitching appliques or designs.

This presser foot is used for forming loops or fringes to decorate workpieces.

This table enlarges the work surface, allowing you to comfortably sew large projects.

This controller can be used to start/stop sewing and adjust the sewing speed with your foot.